User manual

Color Force Compact User Manual 22 V1.8.1 December 2014
www.chroma
-
q.com
3. Press Enter to access the memory data
4. Press the Up/Down buttons and select the channel number
5. To edit the channel level, press Enter and use the Up/Down buttons to adjust the level (shown as 0-255)
6. Press Enter to toggle back to the channel number. When the desired effect is created press Enter for 2
seconds to save the edited Look.
System
SystemSystem
System
In this menu, the control system can be set to control Color Force Compact, Studio Force Compact and Color Block
fixtures:
Fixture
FixtureFixture
Fixture System Options
System OptionsSystem Options
System Options
Color Force Compact Color
Studio Force D Compact Daylight
Studio Force V Compact Varywhite
Studio Force V Phosphor Compact Phosphor V
Color Block 1 CB1 (PSU-300 only)
Color Block 2 Plus CB2 (PSU-300 only)
To set the control system,
1. From the Main Menu, scroll and select System
SystemSystem
System
2. In System
SystemSystem
System, scroll and select an option
3. Press Enter for 2 seconds to save
Wireless
WirelessWireless
Wireless
In this menu, wireless DMX connection can be activated with the power supply unit assigned as a transmitter or
receiver.
To create a new wireless network:
- set all Receivers and unlink from previous connections - Unlink frm Trnsm
Unlink frm TrnsmUnlink frm Trnsm
Unlink frm Trnsm
- set the Transmitter and Add Receivers
To set the Wireless system of the Compact PSU,
1. From the Main Menu, scroll and select Wireless
WirelessWireless
Wireless
2. In Wireless
WirelessWireless
Wireless, select from either Off
OffOff
Off, Receiver
ReceiverReceiver
Receiver or Transmitter
TransmitterTransmitter
Transmitter
The display shows W reset
W resetW reset
W reset when selecting between the options.
To activate the wireless DMX connection between generic transceiver unit as the Transmitter and the Compact PSU
unit as the Receiver:
A. Set the Compact PSU as the Receiver unit:
1. From the main menu, scroll and select Wireless
WirelessWireless
Wireless
2. In Wireless
WirelessWireless
Wireless, select Receiver
ReceiverReceiver
Receiver
3. Press Enter for 2 seconds to save and display shows Wireless
WirelessWireless
Wireless
4. Press Enter, display shows Receiver
ReceiverReceiver
Receiver
5. Press Enter, display shows Unlink frm Trnsm
Unlink frm TrnsmUnlink frm Trnsm
Unlink frm Trnsm
6. Press Enter, Unlink frm Trnsm
Unlink frm TrnsmUnlink frm Trnsm
Unlink frm Trnsm blinks for a few seconds until the display goes back to the previous menu