User manual

Color Force Compact User Manual 14 V1.8.1 December 2014
www.chroma
-
q.com
Control Mod
Control ModControl Mod
Control Mod
es for Color Force Compact fixture:
es for Color Force Compact fixture:es for Color Force Compact fixture:
es for Color Force Compact fixture:
The Color Force Compact fixture consists of a single LED engine with 4 circuits of 7 (Red, Green, Blue, Amber) LEDs each, for a
total of 28 LEDs.
Control Modes – System - Color:
Group
GroupGroup
Group Ch
Ch Ch
Ch
PSU15
PSU15PSU15
PSU15
Ch
Ch Ch
Ch
PSU
PSUPSU
PSU-
--
-
300
300300
300
Display
DisplayDisplay
Display Descrip
DescripDescrip
Description
tiontion
tion
Single 52 22 FxHSI gives 2 colour channels for hue, saturation and a separate intensity channel
for each single fixture and 7 channels for pre-programmed effects.
Single 45 15 HSI gives 2 colour channels for hue and saturation, and a separate intensity
channel for each single fixture.
Single 45 15 RGB gives 3 control channels directly affecting the intensity of the corresponding
Red, Green, Blue LED (with *Magic Amber) for each single fixture. Colour is
mixed by adjusting the levels of the three primary colours. White is achieved
with all channels at full including *Magic Amber.
Single 60 20 RGBA gives 4 control channels directly affecting the intensity of the corresponding
Red, Green, Blue, and Amber LED for each single fixture.
Single 61 21 sRGBI gives 3 control channels directly affecting the intensity of the corresponding
Red, Green and Blue LED (with *Magic Amber), 1 channel affecting the
intensity of all the RGB channels for each single fixture, and a channel for
intensity effects.
Output 15 FxHSI gives 2 colour channels for hue and saturation, a separate intensity channel
for every output of 5 fixtures each, and 6 channels for effects.
Output 9 HSI gives 2 colour channels for hue and saturation and a separate intensity
channel for every output of 5 fixtures each.
Output 9 RGB gives 3 control channels directly affecting the intensity of the corresponding
Red, Green, Blue LED (with *Magic Amber) for every output of 5 fixtures each.
Output 12 RGBA gives 4 control channels directly affecting the intensity of the corresponding
Red, Green, Blue, and Amber LED for every output of 5 fixtures each.
Output 13 sRGBI gives 3 control channels directly affecting the intensity of the corresponding
Red, Green and Blue LED (with *Magic Amber), 1 channel affecting the
intensity of all the RGB channels, and 1 channel for intensity effects for every
output of 5 fixtures each.
All 9 9 FxHSI gives 2 colour channels for hue and saturation, a separate intensity channel
for all the fixtures on all the outputs, and 6 channels for effects.
All 3 3 HSI gives 2 colour channels for hue and saturation and a separate intensity
channel for all the fixtures on all the outputs.
All 3 3 RGB gives 3 control channels directly affecting the intensity of the corresponding
Red, Green, Blue LED (with *Magic Amber) for all the fixtures on all the
outputs.
All 4 4 RGBA gives 4 control channels directly affecting the intensity of the corresponding
Red, Green, Blue, and Amber LED for all the fixtures on all the outputs.