User manual

8
1 2 3
HOW TO OPERATE YOUR C11 TITANIUM EXTREME 1000
SETTING THE TIME/DATE
• First unscrew the crown anti-clockwise from the
case to position
1
for winding in power. Wind in
a clockwise direction to re-power the watch.
• Pull gently into position
2
. For rapid date
correction, turn in a clockwise direction.
• Pull gently into position
3
. This position is used for
handsetting, and stopping of the second hand.
For precise time setting it is recommended to
pass beyond the desired minute and to set the
hand backwards.
PLEASE NOTE: The date cannot be changed
during the date changing phase between 21.00 hrs
and 02.00 hrs as the watch gearing will already
be aligning itself to change the date. The crown
should always be pushed in after adjustment and
screwed in, and it is best to do so from position
3
to avoid advancing beyond the desired date.
You must always ensure the crown is fully
tightened before any use in water.