User manual

HOW TO OPERATE YOUR C11 TITANIUM EXTREME 1000

USING THE INTERNAL BEZEL

If using the internal bezel for a dive and lets say the

recognised maximum “no-stop time” is 55 minutes,

then in this example (shown left) the time at the

surface immediately before the dive is 10.09am.

However the internal bezel is at the 12.00 hr position.

Turn the bezel control clockwise to move the 55min

marker so that it aligns with the 9 minute position.

After 55 minutes the time will count down to zero

shown by the triangle marker.

PLEASE NOTE: It is always useful and best practice

to make a note on a dive slate before entering

the water and to carry a set of dive tables should

the dive plan change during the course of the

dive. A safety stop for 3 to 5 minutes at 15ft is

recommended at the end of all dives. A safety stop

for 3 minutes at 15ft is required any time you come

within 3 pressure groups of a no decompression

limit, and for any dive to a depth of 100ft or deeper.

Start of dive