User manual

7
How to operate your C1 Power Reserve
The crown should sit ush to the case (position 1 )
in order to maintain water resistance.
• To re-power the watch after a period of non-use,
simply wind the crown in a clockwise direction
until the power reserve indicator shows 100%
power.
• To set the time pull out the crown gently into
position
2 . This position is used for handsetting
and stopping of the second hand. Turn the crown
until you reach the correct time e.g. 10.08 hr.
For precise time setting it is recommended you
pass beyond the desired minute and to set the
hand backwards.
Please Note: When handsetting and manually
advancing the hands clockwise, the second hand
will stay stationary, but the second hand may jump
backwards when the hands are rotated counter
clockwise. The second hand will return to its original
position when the crown is released.