User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Specifications
Christie Vive Audio SKA-3D User Manual 89
020-101056-02 Rev. 1 (10-2013)
Connector Pins
This section defines the SKA-3D connector pinouts.
DB-25, Female, Balanced Analog In
The DB-25 connector conforms to the THX standard.
Pin Signal Channel
1 Shield 1 Left (L)
2+ 1 Left (L)
3 - 7 Back Left/Left Center
4Shield3 Center (C)
5 + 3 Center (C)
6 - 8 Back Right/Right Center
7Shield2 Right (R)
8+ 2 Right (R)
9 Shield 6 Right Surround (RS)
10 - 5 Left Surround (LS)
11 - 6 Right Surround (RS)
12 - 4 Subwoofer
13 Shield 4 Subwoofer
14 - 1 Left (L)
15 Shield 7 Back Left/Left Center
16 + 7 Back Left/Left Center
17 - 3 Center (C)
18 Shield 8 Back Right/Right Center
19 + 8 Back Right/Right Center
20 - 2 Right (R)