User manual

Specifications
Christie Vive Audio SKA-3D User Manual 87
020-101056-02 Rev. 1 (10-2013)
Connections
Specification
Outputs Video • HDMI L / DVI-D (left eye in dual stream 3D mode;
active output in sequential 3D mode
• HDMI R / DVI-D (right eye in dual stream 3D mode)
Audio • 8 x Balanced Analog (DB-25)
• L (left) Low, Balanced Analog (3-Pin Phoenix)
• C (center) Low, Balanced Analog (3-Pin Phoenix)
• R (right) Low, Balanced Analog (3-Pin Phoenix)
• Aux 1 / LS (left surround) Low, Balanced Analog (3-Pin
Phoenix)
• Aux 2 / RS (right surround) Low, Balanced Analog (3-
Pin Phoenix)
• HI (hearing impaired), Balanced Analog (3-Pin Phoenix)
• VI/N (visually impaired / Narrative)
• Booth Monitor, Unbalanced Analog (RCA)
• Headphone (TRS)
Inputs Video • 2 x HDMI (support for embedded audio)
• 1 x DVI-D (support for embedded audio)
• 1 x DVI-I (does not support audio in analog mode)
• 2 x Component (3 x RCA)
• VGA (HD15)
Audio • 16 x DCI-AES Digital, 8 Pairs (DB-25)
• DCI-AES ALT 1 Pairs 1-4 (RJ-45)
• DCI-AES ALT2 Pairs 5-8 (RJ-45)
• 8 x Balanced Analog (DB-25)
• 3 x Analog (RCA)
• 3 x Coax SPDIF (RCA)
• 3 x Optical SPDIF (Toslink)
• 2 x HDMI/DVI (support for embedded audio)
• Microphone (XLR)
DB-25, Female, Balanced Analog
In
• Reference level: 300 mV (rms)
• Maximum input level before clipping: 4 V (rms)
• Input impedance: 25 kΩ
• Frequency response: ±0.5 dB @20 to 20 kHz
±3.0 dB @ 10 to 38 kHz
• THD: <0.001% @ 1 kHz 3 V (rms)
• SNR: 110 dB, A-weight, 20 to 20 kHz
• Balanced input can be used with unbalanced or
balanced sources
Analog Microphone input (XLR) • Input gain range (control knob): 9 dB to 60 dB
• Phantom power support