User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Web Interface
Christie Vive Audio SKA-3D User Manual 81
020-101056-02 Rev. 1 (10-2013)
System Configuration Screen
Ref. Item Description
A IP Configuration Sets the following:
• MAC Address - provides the MAC address of the SKA-3D. This information is not
editable.
• IP Address - sets the IP address. This must be valid and unused IP address on
your network. The maximum value for each number is 255.
• Subnet - sets the subnet mask. The default is 255.255.255.0.
• Gateway - sets the router IP address. The maximum value for each number is
255.
• Port - Sets the HTTP listening port. Options range from 0-65535. The default port
is 80.
• Telnet Port (RAW/TCP) - sets the telnet listening port. Options range from 0-
65535. The default setting is 23.
Click Save Changes to save the current settings.
BFirmware
Upgrade
Provides firmware upgrade options. The current firmware version is displayed in the
top left corner. Click Get Firmware to check for and download the latest firmware
version. Click Browse to select the firmware after it has been downloaded. Click
Update to update the firmware after it is selected.
A settings backup is recommended before you upgrade the firmware.
CReset to Factory
Defaults
Resets the SKA-3D back to the default factory settings.
D System Settings Loads system settings from an existing backup file. Click Backup to save the SKA-3D
settings to a file on the computer. Click Browse to select a file to upload. Click
Restore to upload the file to the SKA-3D.
Use this backup feature before upgrading the firmware.
E Reboot Restarts the SKA-3D after making any configuration changes.