User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
80 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Web Interface
Trigger Outputs Tab
Use the eight 12V triggers to control lighting systems, curtains, motorized screens, or automation
devices. Each trigger can be configured separately.
Ref. Item Description
A Event Trigger Sets the event trigger to be used.
B Output State Sets the initial state of the trigger. Available options include: Normally Open, and
Normally closed.
C Action Sets the trigger type. Available options include: Pulse, and Level.
Specify Pulse Duration if Pulse is selected.
D Pulse Duration Sets the pulse duration between 0 and 10000 (1000 = 1 second) when Pulse is
selected from the Action list.
E Save and Load
Settings
Saves the current trigger output settings, or loads a previously saved trigger output
file. Click Browse to select the previously saved trigger output settings.