User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Web Interface
Christie Vive Audio SKA-3D User Manual 75
020-101056-02 Rev. 1 (10-2013)
Delay Settings Tab
Output Channel EQ Tab
Ref. Item Description
A Lipsync Delay Sets the lipsync (audio) delay for each input source. Move the slider to adjust the
delay between 0...250 milliseconds. The selected delay is displayed in the box at the
right. Click Reset to reset all lipsync delay values to zero.
B Speaker Distance Sets the distance for each speaker. Select the required measurement: Feet or
Meters; then move the slider to adjust the distance. Click Reset to reset all speaker
distance values to their default setting.
Ref. Item Description
A Select Channel to
Adjust
Sets the channel to be adjusted. Available options include: Left, Right, Center, Left
Surround, Right Surround, Back Left Surround, Back Right Surround, Left
Center, and Right Center. Click Reset to reset the currently selected audio channel
to the default EQ settings.
B Output Channel
Equalizer
Sets the individual output channels. Move the slider to adjust the value.