User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
74 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Web Interface
Audio Processing Tab
F Bi-amp LC and RC
to Aux 1/2
Sets the crossover frequency for the left and right center speakers to
Aux 1/2. Move the slider to adjust the frequency in 5 Hz increments between 40 and
4000 Hz (4 kHz). Select the Enable check box to activate the crossover.
Speaker Configuration must be set to 5-Screen + 2-Surrounds, or 5-Screen + 4-
Surrounds to adjust this frequency.
Ref. Item Description
A Audio Processing
Mode
(Professional)
Sets the audio processing mode for balanced analog 8-channel and digital (DCI-AES)
16-channel audio formats. Available options include: DCI 8 Channel Mapping 7.1,
DCI 6 Channel Mapping 5.1, Dolby Surround 7.1, Stereo 2.0, and Mono 1.0.
B Channel
Configuration
Image
Provides a graphic representation of the current speaker configuration. Speakers
used in the speaker configuration are green, speakers not used are gray.
C Audio Processing
Mode (Consumer)
Sets the audio processing mode for consumer-based audio applications (HDMI,
Optical, Coax, and Analog Stereo RCA). Available options include: Auto Format
Detect, Dolby Pro Logic II, Stereo 2.0, and Mono 1.0.
D Reference Level
Compensation
Applies a -3dB gain to the front right, left, and center channels when selected.
EDynamic Range
Compression
Enables or disables dynamic range compression for the Dolby TrueHD and Dolby
Digital & DD plus audio formats. When Dolby True HD is set to ON, the SKA-3D
reduces the volume of loud sounds and amplifies quiet sounds by compressing the
dynamic range of the audio signal. In AUTO mode, the metadata in the Dolby
TrueHD source material configures the settings of DRC automatically to match the
intention of the original sound design.
Ref. Item Description