User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

68 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Serial Control
trgrout (cont.)
p4 action event options:
•
0 - Level
•
1 - Pulse
p5 options:
•
0...10000 - Pulse
duration in
milliseconds
username
Sets the telnet
username.
s username [p1]
p1 is the case-sensitive
Telnet username. The
maximum length of is
20 characters.
s username flynn USERNAME IS
“flynn”
Returns the telnet
username.
r username
none
r username USERNAME IS
“flynn”
vichsrc
Selects the
visually-impaired
channel source and
sets the volume
control.
s vichsrc [p1]
[p2]
p1 options:
•
0 - Channel, no audio
is output to the
hearing impaired
output
•
1...16 - Channel
•
17 - Channel, audio
is down-mixed to
Left, Right, and
Center (LCR)
•
18 - Channel, audio
is down-mixed to the
left channel
•
19 - Channel, audio
is down-mixed to the
right channel
p2 options:
•
0 - Fixed level
•
1 - Track with master
volume
s vichsrc 4 0 VICHSRC CH4 FIXD
Returns the output
volume for the
specified channel.
r vichsrc [p1] r vichsrc 4 VICHSRC CH4 FIXD
Command Description Syntax Parameters [p] Example Returned Value