User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

Serial Control
Christie Vive Audio SKA-3D User Manual 67
020-101056-02 Rev. 1 (10-2013)
trgrout (cont.)
p2 audio input event
options (cont):
• 21 - Mic
•
22 - None
p2 trigger input event
options:
•
23 - Trigger in 1
•
24 - Trigger in 2
•
25 - Trigger in 3
•
26 - Trigger in 4
•
27 - Trigger in 5
•
28 - Trigger in 6
•
29 - Trigger in 7
•
30 - Trigger in 8
p2 other event options:
•
31 - Mute
•
32 - No video signal
•
33 - No audio signal
p2 active speaker
output event options:
•
34 - Mono 1.0
•
35 - Stereo 2.0
•
36 - Multi-channel
5.1
•
37 - Multi-channel
7.1
•
38 - Multi-channel
9.1
p2 video input event
options:
•
39 - 3D Active
p3 output state event
options:
•
0 - Normally open
•
1 - Normally closed
Command Description Syntax Parameters [p] Example Returned Value