User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

Serial Control
Christie Vive Audio SKA-3D User Manual 65
020-101056-02 Rev. 1 (10-2013)
testvideo
Enables or disables
the test image for
picture
adjustment.
The test pattern is
output at 2K
resolution,
regardless of the
selected video
output resolution.
s testvideo [p1]
p1 options:
•
0 - Disable
•
1 - Enable
s testvideo 1 VIDEO TEST
PATTERN IS
ENABLED
Returns the test
image setting for
picture
adjustment.
r testvideo
none
r testvideo VIDEO TEST
PATTERN IS
ENABLED
topcrop
Sets the
percentage of
picture crop from
the top of the
picture.
Resize (
resize)
must be set to
Advanced before
using this
command.
s topcrop [p1]
[p2]
p1 options include:
•
0 - HDMI 1
•
1 - HDMI 2
•
2 - HDMI 3 / DVI-I
•
3 - HDMI 4 / DVI-D
•
4 - Component 1
•
5 - Component 2
•
6 - VGA
p2 options include:
•
0...100 - Percentage
of top crop.
s topcrop 1 15 TOPCROP HDMI2
TOPCROP IS SET
TO 15
Returns the
percentage of top
picture crop.
r topcrop [p1] r topcrop 1 TOPCROP HDMI2
TOPCROP IS SET
TO 15
trgrin
Sets the trigger
input to respond to
selected events.
s trgrin [p1] [p2]
[p3]
p1 options include:
•
1...8 - Trigger
p2 options include:
•
0 - Normally low
state
•
1 - Normally high
state
p3 options include:
•
0 - Assigns the preset
to none
• 1...
10 - Preset
s trgrin 2 1 4 TRGRIN 2 NH
PRESET4
PRESET4 is
applied
SOURCE HDMI1
AUDIO 16CH
AUDPRCPRO DCI 8
Returns selected
events for which a
trigger input is set
to respond.
r trgrin [p1] r trgrin 2 TRGRIN 2 NH
PRESET4
Command Description Syntax Parameters [p] Example Returned Value