User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

62 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Serial Control
subbnd3fo
Sets the center
frequency for band
3 of the LFE
parametric EQ.
s subbnd3fo [p1]
p1 options:
•
10...250 - Band
frequency (Hz)
s subbnd3fo 195 SUBBND3FO 195
Returns the center
frequency for band
3 of the LFE
parametric EQ.
r subbnd3fo
none
r subbnd3fo SUBBND3FO 195
subbnd4fo
Sets the center
frequency for band
4 of the LFE
parametric EQ.
s subbnd4fo [p1]
p1 options:
•
10...250 - Band
frequency (Hz)
s subbnd4fo 20 SUBBND4FO 20
Returns the center
frequency for band
4 of the LFE
parametric EQ.
r subbnd4fo
none
r subbnd4fo SUBBND4FO 20
subbndbw
Sets the bandwidth
of each of the four
bands for the LFE
parametric EQ.
s subbndbw [p1]
[p2]
p1 options:
•
1...4 - Band
p2 options:
•
5...60 - Bandwidth
(Hz)
s subbndbw 2 25 SUBBNDBW2 25
Returns the
bandwidth of each
of the four bands
for the LFE
parametric EQ.
r subbndbw [p1] r subbndbw 2 SUBBNDBW2 25
subbndlvl
Sets the level of
each of the four
bands for the LFE
parametric EQ.
s subbndlvl [p1]
[p2]
p1 options:
•
1...4 - Band
p2 options:
•
-12...12 - Level (dB)
s subbndlvl 3 -8 SUBBNDLVL3 -8.0
Returns the level
of the specified
band for the LFE
parametric EQ.
r subbndlvl [p1] r subbndlvl 3 SUBBNDLVL3 -8.0
Command Description Syntax Parameters [p] Example Returned Value