User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

Serial Control
Christie Vive Audio SKA-3D User Manual 61
020-101056-02 Rev. 1 (10-2013)
spkrlvl
Sets the audio
level for the
specified speaker.
s spkrlvl [p1]
[p2]
p1 options:
•
0 - Center
•
1 - Front Left
•
2 - Front Right
•
3 - Surround Left
•
4 - Surround Right
•
5 - Surround Back
Left
•
6 - Surround Back
Right
•
7 - Center Left
•
8 - Center Right
p2 options:
•
-20...0 - Speaker
audio level in dB.
s spkrlvl 3 -9 SPKRLVL SL -9
Returns the
speaker audio
level.
r spkrlvl [p1] r spkrlvl 3 SPKRLVL SL -9
subbnd1fo
Sets the center
frequency for band
1 of the LFE
parametric EQ.
s subbndlfo [p1]
p1 options:
•
10...250 - Band
frequency (Hz)
s subbndlfo 125 SUBBND1FO 125
Returns the center
frequency for band
1 of the LFE
parametric EQ.
r subbndlfo
none
r subbndlfo SUBBND1FO 125
subbnd2fo
Sets the center
frequency for band
2 of the LFE
parametric EQ.
s subbnd2fo [p1]
p1 options:
•
10...250 - Band
frequency (Hz)
s subbnd2fo 75 SUBBND2FO 75
Returns the center
frequency for band
2 of the LFE
parametric EQ.
r subbnd2fo
none
r subbnd2fo SUBBND2FO 75
Command Description Syntax Parameters [p] Example Returned Value