User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Serial Control
Christie Vive Audio SKA-3D User Manual 55
020-101056-02 Rev. 1 (10-2013)
mstervol
Sets the master
volume level.
The Web interface
is immediately
updated to reflect
the master volume
change.
The minimum
volume increment
is 0.1.
s mstervol [p1]
p1 options:
•
0.0...10.0 - Volume
level in dB
s mstervol 3.4 MSTERVOL 3.4
Returns the master
volume level.
r mstervol
none
r mstervol MSTERVOL 3.4
mute
Mutes or un-mutes
the master volume
level.
s mute [p1]
p1 options:
•
0 - Un-mute
• 1 - Mute
s mute 1 VOLUME IS MUTE
Returns the
current mute
status.
r mute
none
r mute VOLUME IS MUTE
output
Sets the output
resolution.
s output [p1]
p1 options:
•
0 - Bypass, the
output resolution is
the same as the input
resolution.
•
1 - 1920 x 1080P
•
2 - 2K
s output 1 OUTPUT 1080P
Returns the output
resolution.
r output
none
r output OUTPUT 1080P
Command Description Syntax Parameters [p] Example Returned Value