User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Serial Control
Christie Vive Audio SKA-3D User Manual 49
020-101056-02 Rev. 1 (10-2013)
eq (cont.) FR EQ20000 IS
SET TO 0.0
r eq 2 18 FR EQ1250 IS SET
TO -5.0
gateway
Sets the gateway
(router) IP
address.
s gateway [p1]
p1 is the gateway IP
address using a dot-
decimal notation. Each
number must be within
the range of 0-255. The
default gateway is
192.168.206.1.
s gateway 192.168.206.1 GATEWAY
192.168.206.1
Returns the
gateway (router)
IP address.
r gateway
none
r gateway GATEWAY
192.168.206.1
help
Displays a list of
serial control
commands or
displays help
comments for the
specified command
when [p1] is
provided.
help
or
help [p1]
p1 is any command
listed in this table.
help source VIDEO INPUT
SOURCE SELECT S
SOURCE P1
>SOURCE P1 P1 -
INPUT (0 - 7)
0=HDMI1,
1=HDMI2,
2=HDMI3/DVI-I,
3=HDMI4/DVI-D,
4=Component1,
5=Component2,
6=VGA, 7=NONE
Command Description Syntax Parameters [p] Example Returned Value