User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

46 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Serial Control
disptelwel
Enables or disables
the Telnet welcome
message. When
enabled, the
TELNET
WELCOME!!
message displays.
s disptelwel [p1]
p1 options:
•
0 - Disable
•
1 - Enable
s disptelwel 1 TELNET WEOCOME
DISPLAY IS
ENABLED
Returns the Telnet
welcome message
setting.
r disptelwel
none
r disptelwel TELNET WEOCOME
DISPLAY IS
ENABLED
drcdd
Turns dynamic
range control
(DRC) for Dolby
Digital and Dolby
Digital Plus audio
formats on or off.
s drc [p1]
p1 options:
•
0 - Off
•
1 - On
s drcdd 1 DRC for Dolby
Digital and
Dolby Digital
Plus is set to
ON
Returns the
current dynamic
range control
setting.
r drc
none
r drcdd DRC for Dolby
TrueHD is set to
OFF
drctruehd
Enables or disables
dynamic range
control (DRC) for
the Dolby TrueHD
auto format. This
feature reduces
the volume of loud
sounds and
amplifies quiet
sounds by
compressing the
dynamic range of
the audio signal.
s drctruehd [p1]
p1 options:
•
0 - Disable
•
1 - Enable
• 2 - Auto
s drctruehd 1 DRC for Dolby
TrueHD is set to
ON
Returns the DRC
status.
r drctruehd
none
r drctruehd DRC for Dolby
TrueHD is set to
ON
Command Description Syntax Parameters [p] Example Returned Value