User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

38 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Serial Control
audiomon (cont.)
•
6 - Right Surround
•
7 - Back left
Surround
•
8 - Back Right
Surround
•
9 - Center Left
•
10 - Center Right
•
11 - HI
•
12 - VI/N
Returns the audio
channel that is
being monitored.
r audiomon
none
r audiomon AUDIOMON LEFT
CENTER
audprccon
Sets the consumer
audio processing
mode.
s audprccon [p1]
p1 options:
•
0 - Auto format
detect
•
1 - Dolby Pro Logic II
•
2 - Stereo 2.0
•
3 - Mono 1.0
s audprccon 2 AUDPRCCON STEREO
2.0
Returns the
consumer audio
processing mode.
r audprccon
none
r audprccon AUDPRCCON STEREO
2.0
audprcpro
Sets the
professional audio
processing mode.
s audprcpro [p1]
p1 options:
•
0 - DCI 8-ch map 7.1
•
1 - DCI 6-ch map 5.1
•
2 - Dolby Surround
7.1
•
3 - Stereo 2.0
•
4 - Mono 1.0
s audprcpro 2 AUDPRCPRO
DLBYSUR 7.1
Returns the
current
professional audio
processing mode.
r audprcpro
none
r audprcpro AUDPRCPRO
DLBYSUR 7.1
Command Description Syntax Parameters [p] Example Returned Value