User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Christie Vive Audio SKA-3D User Manual 35
020-101056-02 Rev. 1 (10-2013)
Serial Control
This section describes RS-232 settings and Telnet commands for operating the SKA-3D.
DE-9 Connector Components
RS-232 Settings
DE-9 Connector
a
a. Only the RXD, TXD, and GND pins are used.
RS-232 Controller PIN PIN SKA-3D
DCD 1 1DCD
RXD 2 2 RXD
TXD 3 3 TXD
DTR 4 — 4 DTR
GND 5 — 5 GND
DSR 6 6DSR
RTS 7 7RTS
CTS 8 8CTS
R1 9 9R1
Specification Setting
Baud rate 115200
Data bits 8
Parity bits None
Stop bits 1
Flow control None