User manual

Operation
Christie Vive Audio SKA-3D User Manual 33
020-101056-02 Rev. 1 (10-2013)
Import Trigger Outputs from a File
1. Open the SKA-3D web interface.
See Access the SKA-3D Web Interface on page 71.
2. Click the Automation tab.
3. Click the Trigger Outputs tab.
4. Click Browse, and select the trigger outputs XML file to import.
5. Click Load.
Use an External Microphone
1. Connect the microphone to the XLR jack.
2. Turn the Mic Level knob to adjust the input gain (9-60 dB).
3. Turn the Mic Mode Select knob to set the behavior of the microphone output signal:
• Mute - mutes the output signal.
• Booth - limits the microphone output signal to the booth area (using the Booth Monitor
jacks on the back of the SKA-3D)
• Booth + Auditorium - broadcasts the microphone output signal to the booth and the
auditorium.
4. Monitor the current input gain of the microphone signal.
See Indicators on page 5.
Audio distortion can result if the input level is 0 dB or greater.
Monitor an Audio Channel
Stereo headphones can be used to monitor an audio channel.
1. Connect a pair of stereo headphones to the Headphone Out jack on the front of the SKA-3D.
2. Turn the Headphone Level knob to adjust the headphone volume.
3. Press the Source Select button to enter the Audio Monitor Ch menu.
4. Press the left or right navigation button to select the audio channel to be monitored.