User manual

32 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Operation
3. Press Enter.
4. Press the up or down navigation button to display Trigger Outputs.
5. Press the left or right navigation button to select the automation trigger output to configure:
<1>...<4>
6. Press Enter and navigate to TRIGGER TYPE.
7. Press the left or right navigation button to select the required setting:
• <NORM OPEN>
• <NORM CLOSE>
8. Press the up or down navigation button to display EVENT TRIGGER.
9. Press the left or right navigation button and display the required trigger event:
10. Press the up or down navigation button to display TRIGGER SIGNAL.
11. Press the left or right navigation button to select the required setting:
• <LEVEL>
• <PULSE>
12. If required, press the up or down navigation button to display PULSE LENGTH; otherwise, skip
to step 14.
Pulse adjustments are not required for levels.
13. Press the left or right navigation button to select <00000ms>.
The pulse length can be adjusted from 0-10000 ms (10 seconds) in 10 ms increments.
14. Press Exit until you return to the status screen.
Video Inputs Trigger Inputs
<HDMI 1>...<HDMI 4> <Trigger In 1>...<Trigger In 8>
<COMP 1>...<COMP 2>
Video Input Format
<VGA> <3D ACTIVE>
<NONE>
Other
Audio Inputs
<MUTE>
<DIG DCI> <NO VIDEO>
<BAL ANALOG> <NO AUDIO>
<HDMI AUD>
Active Speaker Output
<OPT 1>...<OPT 3> <MONO 1.0>
<COAX 1>...<COAX 3> <Stereo 2.0>
<ANALOG 1>...<ANALOG 3> <5.1>
<MIC> <7.1>
<NONE> <9.1>