User manual

Operation
Christie Vive Audio SKA-3D User Manual 31
020-101056-02 Rev. 1 (10-2013)
• <1>...<10>
10. Press Exit until you return to the status screen.
Import Trigger Inputs from a File
1. Open the SKA-3D web interface.
See Access the SKA-3D Web Interface on page 71.
2. Click the Automation tab.
3. Click the Trigger Inputs tab.
4. Click Browse, and select the trigger inputs XML file to import.
5. Click Load.
Manage Trigger Outputs
Trigger outputs provide control of automation devices such as lighting systems, curtains, or
motorized screens. The SKA-3D has 4 available trigger outputs (1-4).
Configure Trigger Outputs
Configure trigger outputs using the web interface or the SKA-3D controls. It is useful to use the web
interface when multiple trigger outputs are set at one time. Use the SKA-3D controls to change
individual configuration settings.
Configure Trigger Outputs with the Web Interface
1. Open the SKA-3D web interface.
See Access the SKA-3D Web Interface on page 71.
2. Click the Automation tab.
3. Click the Trigger Outputs tab.
4. Select the Event Trigger from the list.
5. Select the Output State from the list.
6. Select the Action from the list. If Pulse is selected, complete the Pulse Duration field.
7. Repeat steps 4 to 6 for the remaining trigger outputs.
8. Click Save, and save the trigger outputs as an XML file.
Configure Trigger Outputs with the SKA-3D Controls
1. Press Menu.
2. Press the left or right navigation button to display Automation Settings.