User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
28 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Operation
Configure Presets using the SKA-3D Controls
1. Press Menu.
2. Press the left or right navigation button to display Automation Settings.
3. Press Enter.
4. Press the up or down navigation button to display Preset Settings.
5. Press the left or right navigation button and select the automation preset to configure:
<1>...<A>
6. Press Enter.
The SWITCH TO VIDEO menu displays.
7. Press the left or right navigation button and select the required video input:
• Input <DVI 1>
• Input <DVI 2>
• Input <COMP 1>
• Input <COMP 2>
• Input <VGA>
• Input <NONE>
• Input <NO ACTION>
• Input <HDMI 1>
• Input <HDMI 2>
8. Press the down navigation button to display SWITCH TO AUDIO.
9. Press the left or right navigation button to select the required audio input:
• INPUT DIG DCI
• Input BAL ANALOG
• Input HDMI
• INPUT OPT 1
• Input OPT 2
• Input OPT 3
• Input COAX 1
• Input COAX 2
• Input COAX 3
• Input ANALOG 1
• Input ANALOG 2
• Input ANALOG 3
• Input MIC