User manual

Operation
Christie Vive Audio SKA-3D User Manual 27
020-101056-02 Rev. 1 (10-2013)
6. Press Enter to save changes.
7. Press Exit until you return to the status screen.
Manage Presets
Presets allow you to save configured settings for audio inputs, video inputs, audio modes, and master
volume levels. The SKA-3D has 10 presets that can be applied manually or triggered with an event.
Event-triggered presets require an automation controller.
Configure Presets
Ten preset are available on the SKA-3D. Presets are numbered 1-9 and then the 10th preset is
represented by the letter A.
Configure presets using the web interface or the SKA-3D controls. It is useful to use the web
interface when multiple presets are set at one time. Use the SKA-3D controls to change individual
preset settings.
Configure Presets using the Web Interface
1. Open the SKA-3D web interface.
See Access the SKA-3D Web Interface on page 71.
2. Click the Automation tab.
3. Click the Presets tab.
4. Enter a name for the preset under Preset Name.
5. Select the Switch to Video Input from the list.
6. Select the Switch to Audio Input from the list.
7. Select the Switch to Audio Mode from the list.
Options change depending on the selected audio input.
8. Select the volume setting from the list. If Custom is selected, move the slider to the required
volume.
9. If required, repeat steps 4 to 8 for the remaining presets.
For example,
10. Click Save, and save the presets as an XML file.