User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
24 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Operation
6. Press the left or right navigation button and turn the phantom power on or off:
• <OFF>
• <ON>
7. Press Exit until you return to the status screen.
Adjust Advanced Audio Settings
This section describes how to adjust advanced audio settings; such as, the speaker configuration or
bi-amp LCR, LC, and LS settings.
Adjust the Speaker Configuration
1. Press Menu.
2. Press the left or right navigation button to display Adv. Audio Settings.
3. Press Enter.
4. Press the up or down navigation button to display Speaker Config.
5. Press the left or right navigation button to select the audio speaker configuration:
• <3SCR+2SURR>
• <3SCR+4SURR>
• <5SCR+2SURR>
• <5SCR+4SURR>
• <Mono C>
• <Stereo LR>
6. Press Enter.
7. Press Exit until you return to the status screen.