User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Operation
Christie Vive Audio SKA-3D User Manual 21
020-101056-02 Rev. 1 (10-2013)
• Resize <OVERSCAN> - resizes the image 5% beyond the normal display area. This
feature is useful in correcting an image that is “underscanned”.
• Resize <UNDERSCAN> - scales the image within 5% of the normal display area. this
feature is useful for correcting an image that is “overscanned”.
• Resize <LETTERBOX> - stretches the image horizontally while preserving the original
aspect ratio of the image.
• Resize <PANSCAN> - Scales the original content to 4:3, while maintaining the original
aspect ratio of the image.
• Resize <ADVANCED> - allows individual cropping, sizing, and positioning of the image.
7. Press Exit until you return to the status screen.
Adjust the Test Pattern
1. Press Menu.
2. Press the left or right navigation button to display Video Settings.
3. Press Enter.
4. Press the up or down navigation button to display Test Pattern.
5. Press Enter.
6. Press the left or right navigation button and enable or disable the test pattern:
• <ENABLE> - enables the test pattern on output.
• <DISABLE> - disables the test pattern on output.
7. Press Exit until you return to the status screen.
Adjust the Audio Settings
This section describes how to adjust the audio settings including, channel level, speaker distance,
lipsync delay, and phantom power.
Adjust the Channel Level
1. Press Menu.
2. Press the left or right navigation button to display Audio Settings.
3. Press Enter.
4. Press the up or down navigation button to display Channel Level.
i
The test pattern is output at 2K resolution, regardless of the selected video output
resolution.