User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings

20 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Operation
Adjust Video Settings
This section describes how to adjust the picture settings, video size, and test pattern.
Adjust the Picture Settings
1. Press Menu.
2. Press the left or right navigation button to display Video Settings.
3. Press Enter.
4. Press the up or down navigation button to display Picture Settings.
5. Press Enter.
6. Press the up or down navigation button and select the picture setting to adjust:
• Contrast <0-100%>
• Brightness <0-100%>
• Color Temp <5500K, 9600K, or 6500K>
7. Press the left or right navigation button to adjust the setting.
8. Press Exit until you return to the status screen.
Adjust the Video Size
1. Press Menu.
2. Press the left or right navigation button to display Video Settings.
3. Press Enter.
4. Press the up or down navigation button to display Resize.
5. Press Enter.
6. Press the left or right navigation button and select the video size:
• Resize <NATIVE> - uses the resolution of the original file.
• Resize <FULL SIZE> - resizes the image to fill the entire screen. If this setting is applied
to a 4:3 image on a 16:9 display, the image is horizontally and vertically stretched to fill
the entire screen.
• Resize <FULL WIDTH> - resizes the image to fill the full width of the screen. The image
height is preserved.
• Resize <FULL HEIGHT> - resizes the image to fill the full height of the screen. The
image width is preserved.
• Resize <ANAMORPHIC> - displays content that was filmed in anamorphic format in the
original aspect ratio.