User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Operation
Christie Vive Audio SKA-3D User Manual 19
020-101056-02 Rev. 1 (10-2013)
Navigate the Main Menu System
1. Press Menu.
2. Press the right or left navigation button to scroll through the main menu:
• Video Settings
See Adjust Video Settings on page 20.
See Adjust the Video Size on page 20.
See Adjust the Test Pattern on page 21.
• Audio Settings
See Adjust the Channel Level on page 21.
See Adjust the Speaker Distance on page 22.
See Adjust the Lipsync Delay on page 23.
See Adjust the Phantom Power on page 23.
• Adv. Audio Settings
See Adjust the Speaker Configuration on page 24.
See Adjust the BI-AMP LCR on page 25.
See Adjust the BI-Amp LCR Crossover Frequency on page 25.
See Adjust the BI-Amp LC & RC to Aux 1/2 on page 25.
See Adjust the BI-Amp LC & RC to Aux 1/2 Crossover Frequency on page 26.
See Adjust the BI-Amp LS & RS to Aux 1/2 on page 26.
See Adjust the BI-AMP LS & RS Crossover Frequency on page 26.
• Automation Settings
See Manage Presets on page 27.
See Manage Trigger Inputs on page 30.
See Manage Trigger Outputs on page 31.
The LCM displays the selected menu item.
i
Press and hold the right or left navigation button to quickly scroll through options at a faster
rate.