User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
18 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Operation
• RIGHT CENTER
• HI (Hearing Impaired)
• VI/N (Visually Impaired / Narrative)
4. Press ENTER.
5. Press Exit until you return to the status screen.
Adjust the IP Address, Subnet, Gateway, Port, or Telnet
Port
1. Press the up or down navigation button to display IP Configuration.
2. Press Enter.
3. Press the up or down navigation button and select the network parameter to configure:
• IP ADDRESS
(###.###.###.###)
• SUBNET
(###.###.###.###)
• GATEWAY
(###.###.###.###)
• PORT
(##)
• TELNET PORT
(##)
4. Press ENTER.
A flashing cursor displays in the number field.
5. Press the up or down navigation button to set the numbers, and left or right navigation button to
move the cursor.
6. Press Exit until you return to the status screen.