User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
14 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Operation
• Christie Digital SKA-3D
See Display the Firmware Version on page 11.
2. Press Enter.
The current output menu item is displayed in the LCM display.
Adjust the Audio Processing Mode
1. Press the up or down navigation button to display Audio Proc. Mode <>.
2. Press the left or right navigation button to select the audio processing mode:
• <DCI 8Ch Map> (Professional application)
• <DCI 6Ch map> (Professional application)
• <Dolby Surr 7.1> (Professional application)
• <Auto Detect> (Consumer application)
• <Dolby PLII> (Consumer application)
• <Stereo> (Consumer application)
• <Mono> (Consumer application)
3. Press Enter.
4. Press Exit to return to the status screen.
Adjust the Auto Preset Select
1. Press the up or down navigation button to display Auto Preset Select.
2. Press the left or right navigation button to select an auto preset:
1 - PresetName...10 - PresetName
3. Press Enter.
4. Press Exit to return to the status screen.
i
When the processing mode is set to Mono in Consumer mode, all channels are down-
mixed to the center channel. In Professional mode, only the center channel is active.
Auto Detect and Dolby PLII processing modes are only available when the audio input is
set to HDMI, TOSLINK, COAX, or Analog.