User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
12 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Operation
2. Connect one end of the Ethernet cable to the Ethernet port on the SKA-3D and then connect the
other end of the cable to the Ethernet port on the computer running the web interface.
See Access the SKA-3D Web Interface on page 71.
3. Click the System Configuration tab.
See System Configuration Screen on page 81.
4. Click Browse in the Firmware Upgrade pane.
5. Click OK when the LCM prompts you to verify that you want to overwrite the current firmware.
The web interface is disabled during the firmware upgrade.
6. Wait for the SKA-3D to reboot or press Lock to bypass the reboot countdown.
The SKA-3D reboots.
7. If required, click Reset to reset the SKA-3D to its default settings.
8. If required, click Restore to load the system settings file.
Select a Video Input
Press Video Select to select a video input:
• HDMI 1
• HDMI 2
• HDMI 3
• HDMI 4
• Comp 1
• Comp 2
• VGA
• NONE
The LCM displays the current video input.
Select an Audio Input
Press Audio Select to select an audio input:
• 16CH
• 8CH
• HDMI
• OPT1
• OPT2
• OPT3