User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Introduction
Christie Vive Audio SKA-3D User Manual 7
020-101056-02 Rev. 1 (10-2013)
Rear Panel
F Opt 3 Accepts multichannel digital audio (DTS® and Dolby® Digital) and two-channel
Linear PCM using a cable with an optical cable with a TOSLINK connector.
G Headphone out Accepts a pair of stereo headphones using a 1/4” TRS jack.
H Mic Accepts a microphone using a balanced XLR connector.
I Comp 2 Accepts three Component (YPbPr) video cables from the source to these
RCA-type connectors.
J VGA 1 Accepts an a VGA (RGBHV) cable from the source to this HD-15 connector.
K HDMI 2 Accepts an HDMI cable from the source to this HDMI connector.
L HDMI 4 / DVI-D Accepts a DVI-D or HDMI-to-DVI cable from the source to this DVI connector. This
input also accepts HDMI audio.
Ref. Item Description
A Analog 1 Accepts 2-channel analog audio using one pair of RCA-type connectors.
B Balanced Analog
In (8 ch)
Accepts a DB-25 type connector and up to eight channels of multichannel analog
audio.
C Coax 1 Accepts multichannel digital audio (DTS® and Dolby® Digital) and two-channel
Linear PCM using a cable with an RCA-type connector.
D Opt 1 Accepts multichannel digital audio (DTS® and Dolby® Digital) and two-channel
Linear PCM using a cable with an optical cable with a TOSLINK connector.
E Alt 1 Accepts the RJ-45 connector from a DB-25-to-RJ-45 cable that carries digital audio.
This input receives the first eight channels (1-8) of digital audio.
F DCI-AES Digital
In (16 ch)
Accepts a DB-25 type connector for up to 16 channels of multichannel digital audio.
G Alt 2 Accepts the RJ-45 connector from a DB-25-to-RJ-45 cable that carries digital audio.
This input receives the second eight channels (9-16) of digital audio.
H Balanced Analog
Out (8 ch)
Accepts a DB-25 type connector and handle up to eight channels of multichannel
analog audio
Ref. Item Description