User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
6 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Introduction
Connections
This section describes the SKA-3D front and rear connections.
Front Panel
B Liquid crystal matrix
(LCM) display
Indicates the status of the scaler. The display provides a 19-character, two-line
display in this display format:
[VIDEO_INPUT] [AUDIO_FORMAT] [AUDIO_INPUT]
[3D_FORMAT] [OUTPUT_RESOLUTION] [MASTER_VOLUME_IN_DB]
To change the settings:
• VIDEO_INPUT - the current video input. See Select a Video Input on page 12.
• AUDIO_FORMAT - the current audio format.
• AUDIO_INPUT - the current audio input. See Select an Audio Input on page
12.
• 3D_FORMAT - the current 3D format. See Adjust 3D Mode on page 16.
• OUTPUT_RESOLUTION - the current output resolution. See Adjust the Output
Resolution on page 16.
• MASTER_VOLUME - the current master volume level (dB). To change the
volume, adjust the Main Volume or press Mute.
Ref. Item Description
A Analog 2 Accepts 2-channel analog audio using one pair of RCA-type connectors.
B Analog 3 Accepts 2-channel analog audio using one pair of RCA-type connectors.
C Coax 2 Accepts multichannel digital audio (DTS® and Dolby® Digital) and two-channel
Linear PCM using a cable with an RCA-type connector.
D Opt 2 Accepts multichannel digital audio (DTS® and Dolby® Digital) and two-channel
Linear PCM using a cable with an optical cable with a TOSLINK connector.
E Coax 3 Accepts multichannel digital audio (DTS® and Dolby® Digital) and two-channel
Linear PCM using a cable with an RCA-type connector.
Ref. Item Description