User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
4 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Introduction
Controls
This section describes the SKA-3D controls.
Front Panel
Ref. Item Description
A Headphone level Adjusts the headphone volume.
B Source select Adjusts the audio source for headphone monitoring.
C Mic level Adjusts the microphone listening level. This control does not change the main
output amplitude.
D Navigation buttons Provides left, right, up, and down buttons for menu system navigation.
E Enter Saves menu system changes.
F Mic mix select Selects between Mute, Booth+Auditorium, and Booth.
G Mute Mutes the master volume.
H Lock Locks the front-panel controls to prevent accidental changes.
I Menu Accesses the menu.
J Video select Selects the input video source.
K Audio select Selects the audio input source.
L Exit Exits the menu.
M Main volume Adjusts the main output volume level.