User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
108 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Specifications
Trigger Inputs
Trigger Outputs
System Configuration Settings
This section provides the default system configuration settings.
IP Configuration
Setting Default Value
Trigger Input 1...Trigger Input 8 Trigger input: Normally low
Switch to Preset: None
Preset Name: None
Setting Default Value
Trigger Output 1...Trigger Output 4 Event Trigger: HDMI 1
Output State: Normally Open
Action: Level
Pulse Duration: 0
Setting Default Value
MAC Address (Unit-Dependant)
IP Address 192.168.206.100
Subnet Mask 255.255.255.0
Gateway 192.168.206.1
HTTP Port 80
Telnet Port 23