User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
106 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Specifications
LFE EQ
Center Frequency (Hz): Level (dB)
(cont.)
500:0
630:0
800:0
1000:0
1250:0
1600:0
2000:0
2500:0
3150:0
4000:0
5000:0
6300:0
8000:0
10000:0
12500:0
16000:0
20000:0
Setting Default Value
Bandwidth (Band: Frequency) Band 1: 30 Hz
Band 2: 30 Hz
Band 3: 30 Hz
Band 4: 30 Hz
HPF (High-Pass Filter) Disabled
Band (Level) Band 1: 0.0 dB
Band 2: 0.0 dB
Band 3: 0.0 dB
Band 4: 0.0 dB
LPF (Low-Pass Filter) Disabled
HPF (Hz) 10
LPF (Hz) 200
Setting Default Value