User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Specifications
Christie Vive Audio SKA-3D User Manual 105
020-101056-02 Rev. 1 (10-2013)
Output Channel EQ
Speaker Distance Left: 0.0 ft
Right: 0.0 ft
Center: 0.0 ft
Low frequency effects (LFE): 0.0 ft
Left Surround: 0.0 ft
Right Surround: 0.0 ft
Left Center: 0.0 ft
Right Center: 0.0 ft
Back Left Surround: 0.0 ft
Back Right Surround: 0.0 ft
Setting Default Value
Select Channel to Adjust Center
Channel Level (db) 0.0
Bi-amp LF Level (dB) / Phase (Deg) 0.0 / 0
Test Signal (Pink Noise) Off
High-Pass Filter Disabled
Frequency (Hz): 15
Copy Channel EQ Settings (Copy To) Left
Center Frequency (Hz): Level (dB) 20:0
25:0
31.5:0
40:0
50:0
60:0
80:0
100:0
125:0
160:0
200:0
250:0
315:0
400:0
Setting Default Value