User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
104 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Specifications
Speaker Configuration
Audio Processing
Delay Settings
Setting Default Value
Speaker Configuration 3-Screen + 2-Surrounds
Bi-amp L/C/R Configuration Disabled
Frequency: 160 Hz
Bi-amp LS and RS to Aux 1/2 Disabled
Frequency: 160 Hz
Bi-amp LC and RC to Aux 1.2 Disabled
Frequency: 160 Hz
Setting Default Value
Audio Processing Mode (Professional) DCI 6 Channel Mapping 5.1
Audio Processing Mode (Consumer) Auto Format Detect
Reference Level Compensation Disabled
Dynamic Range Compression (Dolby True HD) OFF
Dynamic Range Compression (Dolby Digital &
DD plus)
OFF
Setting Default Value
Lipsync Delay HDMI 1: 0 ms
HDMI 2: 0 ms
HDMI 3 / DVI-I: 0 ms
HDMI 4 / DVI-D: 0 ms
Comp1: 0 ms
Comp2: 0 ms
VGA: 0 ms
Speaker Distance (Feet / Meters) Feet