User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Specifications
Christie Vive Audio SKA-3D User Manual 103
020-101056-02 Rev. 1 (10-2013)
Default Settings
This section provides the default SKA-3D settings that are used with the web interface.
Input / Output Settings
Video Settings
Audio Settings
This section describes the default audio settings.
Setting Default Value
Video Input HDMI 1
Audio Input Digital DCI AES
Source Select Mix
Master Volume 7.0
Setting Default Value
Select Video Input to Adjust HDMI 1
Contrast 50
Brightness 50
Phase 50
Color Temperature 6500K
Output Resolution 1920 x 1200
3D Mode Dual-Output
HDMI Output Color Depth 10-Bit
De-Interlace Disabled
Enable Video Test Pattern Disabled
Resize Native
Video Settings (Copy To) HDMI 1