User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
102 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Specifications
DCI 8-Channel or SDDS 7.1
Dolby Surround 7.1
Low frequency effects (LFE)
a. Not used.
Channel Input Output
Left (L)
Right (R)
Center (C)
Left surround (LS)
Right surround (RS)
Bottom left side (BLS)
a
a. LS is duplicated on BLS.
Bottom right side (BRS)
b
b. RS is duplicated on BRS.
Left center (LC)
Right center (RC)
Low frequency effects (LFE)
Channel Input Output
Left (L)
Right (R)
Center (C)
Left surround (LS)
Right surround (RS)
Bottom left side (BLS)
Bottom right side (BRS)
Left center (LC)
a
a. Not used.
Right center (RC)
a
Low frequency effects (LFE)
Channel Input Output