User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
98 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Specifications
3 Screen Channels and 4 Surround Channels
DCI 6-Channel or Dolby Digital 5.1
DCI 8-Channel or SDDS 7.1
a. Down-mixed to LS.
b. Down-mixed to RS.
Channel Input Output
Left (L)
Right (R)
Center (C)
Left surround (LS)
Right surround (RS)
Bottom left side (BLS)
a
a. LS is duplicated on BLS.
Bottom right side (BRS)
b
b. RS is duplicated on BRS.
Left center (LC)
Right center (RC)
Low frequency effects (LFE)
Channel Input Output
Left (L)
Right (R)
Center (C)
Left surround (LS)