User manual
Table Of Contents
- Important Safety Information
- Introduction
- Installation
- Operation
- Turn the Power On
- Turn the Power Off
- Manage Firmware
- Select a Video Input
- Select an Audio Input
- Adjust the Outputs
- Adjust the Audio Processing Mode
- Adjust the Auto Preset Select
- Adjust Dolby True HD Dynamic Range Compression
- Adjust Dolby Digital and Dolby Digital Plus Dynamic Range Compression
- Adjust the Reference Level
- Adjust the Output Resolution
- Adjust 3D Mode
- Adjust the DVI Output Color Depth
- Adjust the Audio Monitor Channel
- Adjust the IP Address, Subnet, Gateway, Port, or Telnet Port
- Navigate the Main Menu System
- Adjust Video Settings
- Adjust the Audio Settings
- Adjust Advanced Audio Settings
- Manage Presets
- Manage Trigger Inputs
- Manage Trigger Outputs
- Use an External Microphone
- Monitor an Audio Channel
- Serial Control
- Web Interface
- Troubleshooting
- Specifications
- Supported Video Formats
- Supported Audio Formats
- Power
- Control and Network Ports
- Connections
- Physical
- Connector Pins
- Audio Pins
- Channel Mapping
- Default Settings
Specifications
Christie Vive Audio SKA-3D User Manual 95
020-101056-02 Rev. 1 (10-2013)
Audio Pins
This section describes the SKA-3D audio pinouts.
DB-25, DCI AES Digital In
DB-25, Female, Balanced Analog Audio In
Channel Pin Channel Description
111Left (L)
212Right (R)
321Center (C)
4 2 2 Low frequency effects (LFE)
5 3 1 Left Surround (LS)
6 3 2 Right Surround (RS)
7 4 1 Hearing Impaired (HI)
8 4 2 Visually Impaired (VI/N)
9 5 1 Left Center (LC)
10 5 2 Right Center (RC)
11 6 1 Left Rear Surround (LRS)
12 6 2 Right Rear Surround (RRS)
13 7 1 Motion Data (dbox), not used
14 7 2 For Future Expansion
15 8 1 For Future Expansion
16 8 2 For Future Expansion
Channel Description
1Left (L)
2Right (R)
3 Center (C)
4 Low frequency effects (LFE)
5 Left Surround (LS)
6 Right Surround (RS)
7 Left Center / Left Back
8 Right Center / Right Back