User manual

Connect the Processor
28 TVC-700 User Manual
020-100906-01 Rev. 1 (03/13)
Turn the Processor Off
1. Close all applications.
2. Shut down Windows by selecting Start > Shutdown.
3. Windows shuts down and the processor enters STANDBY POWER
mode. The system power LED changes to amber.
The front panel Power ON/Standby button does not
completely shut off system power. Portions of the power
supply and some internal circuitry remain active until AC
power is removed. If you are powering down for
maintenance, you must also remove the power cord from
each power supply. Failure to remove the power cords may
increase the risk of personal injury, electric shock, or damage
to the equipment.
Failure to comply could result in death or serious injury.
i
If installing a hot-plug device, it is not necessary to power
down the server.