User manual
Connect the Processor
TVC-700 User Manual 27
020-100906-01 Rev. 1 (03/13)
Turn the Processor On
To power up the processor and initialize the input and display modules:
1. Press the Power button on the front panel. The TVC-700 processor
powers on. ď€
2. Wait until the operating system cycles through its initialization
process. This may take several minutes depending on the number
of display cards installed. NOTE: Depending on your display device
capabilities you may or may not see the boot up process. The
resolution of the boot sequence is 640 x 480.
3. Depending upon your installation’s network policy, you may be
prompted for a user name and password. If so, log in with a valid
user name and password.