User manual

Connect the Processor
TVC-700 User Manual 25
020-100906-01 Rev. 1 (03/13)
Connect Ethernet
Connect the CAT5 Ethernet cable(s). This step is only required if you are
connecting to a network. Connect to either of the two Ethernet ports that
are grouped together. Do not use the 3rd Ethernet port.
Connect Display Devices and
Screens
The processor can be customized to include up to 3 AMD FirePro W600
modules, enabling you to choose from a variety of configurations.
Mini DisplayPort to DVI-D Adaptors
To connect display devices to the processor:
1. Connect the Mini DisplayPort end of each adapter to the display
module connectors on the rear panel.
2. Connect the other end of each adaptor to one end of a DVI-D cable.
3. Connect the other end of each DVI-D cable to your display devices.
4. Power up the display devices.
5. Power up the processor. For details, refer to Turn the Processor On,
on page 2-27.