User manual

Connect the Processor
TVC-700 User Manual 23
020-100906-01 Rev. 1 (03/13)
1-Port Dual Link DVI-D Input Module
Each DVI-D input module has one DVI-D connector.
The DVI-D input module can accept the following standard input signals:
DVI-D and HDMI. A maximum canvas of 4K-by-4K allows any DVI source
to be captured, except for analog sources. The dual link input module
has integrated DVI equalizers on its input to support longer input cable
lengths (up to 20m).
8-Port Standard Video Input Module
Each Standard Video Input Module has 8 built-in decoders. A single
Standard Video Module can connect up to 8 composite or S-video
sources. Each module can capture and display 8 composite or S-video
sources simultaneously on one or more displays in a display wall. Each
module has 2 DB26 connectors. Video sources are connected to the
module via a DB26 to 16-way BNC splitter cable connected to the top
port on the module. The bottom port is not used.
i
• Sync signals cannot be swapped between the Horizontal/
Composite and Vertical connectors.
• Sync signal(s) can be negative or positive polarity.
• Sync present on any of the RGB signals will be ignored
when separate or composite sync is input.
• Sync can be bi-level.
• 'No signal' means no signal should be applied to the input.