User manual

Install TVC-700
TVC-700 User Manual 13
020-100906-01 Rev. 1 (03/13)
Remove the Chassis Top Cover
1. Locate the chassis cover lock (blue lever) at the rear of the chassis
cover.
2. Slide the chassis cover lock to the right and push chassis cover
forward.
3. Lift the chassis top cover off the chassis.
Remove the Chassis Feet
1. Place the chassis on its side with the chassis side cover facing
upward.
2. Remove the screw holding the chassis foot in place.
3. The foot lock is a tab located in the center of the foot that prevents
the foot from sliding. Using a flat head screwdriver, gently lift the
foot lock upward and slide the foot toward the rear of the chassis.
4. Repeat steps 2 and 3 with each remaining foot.
Identify the Sections of the Rack Rails
If you also purchased the optional rail mounting kit, then the chassis
package includes two rail assemblies. Each assembly consists of two
sections: an inner fixed chassis rail that secures directly to the chassis
and an outer fixed rack rail that secures directly to the rack itself.