User manual

Introduction
6 TVC-700 User Manual
020-100906-01 Rev. 1 (03/13)
Safety Warnings and Guidelines
Electrical Safety Precautions
General Safety Precautions
Basic electrical safety precautions must be followed to
protect yourself from harm and the TVC-700 from damage.
Be aware of the locations of the power on/off switch on the
chassis as well as the room’s emergency power-off switch,
disconnection switch or electrical outlet. If an electrical
accident occurs, you can then quickly remove power from the
system.
This product can be connected to an IT power distribution
system.
Only qualified service personnel should open the unit to
perform internal maintenance.
Failure to comply could result in death or serious injury.
• Keep the area around the TVC-700 clean and free of
clutter.
• The TVC-700 weighs approximately 72 lbs (32.7 kg.) when
fully loaded. When lifting the system, 2 people at either
end should lift slowly with their feet spread out to
distribute the weight. Always keep your back straight and
lift with your legs.
• Place the chassis top cover and any system components
that have been removed away from the system or on a
table so that they won't accidentally be stepped on.
• While working on the system, do not wear loose clothing
such as neckties and unbuttoned shirt sleeves, which can
come into contact with electrical circuits or be pulled into a
cooling fan.
• Remove any jewelry or metal objects from your body,
which are excellent metal conductors that can create short
circuits and harm you if they come into contact with
printed circuit boards or areas where power is present.
• After accessing the inside of the system, close the system
back up and secure it to the rack unit with the retention
screws after ensuring that all connections have been
made.
Failure to comply could result in minor or moderate injury.